Terrapin Resources

Robot Commands

All Bluetooth robots must be connected to Logo with the Bluetooth selection dialog available at the “Tools/Connect to Bluetooth Device” menu item or the SELECT.BLUETOOTH command.

Pro-Bot needs a serial-to-USB connection, which Terrapin Logo is unable to support at the time.

BLUEBOT?

Also: BLUEBOTP, BLUEBOT.OPEN

Tests if the Blue-Bot is connected and ready to receive commands.

Syntax

Description

BLUEBOT? reports TRUE if it can talk to a Blue-Bot.

For backwards compatibility, BLUEBOT.OPEN is synonymous to BLUEBOT?.

Example

BLUEBOT? Result: FALSE

BLUEBOT.BATTERY

Reports Blue-Bot’s battery level.

Syntax

Description

BLUEBOT.BATTERY reports Blue-Bot’s battery level, which is a number between 0 and 1. It may take a few seconds before Blue-Bot actually reports the battery level; the command would report 0 in that case.

Example

BLUEBOT.BATTERY Result: 0.8

BLUEBOT.CLEAR

Clears all commands stored in Blue-Bot’s memory.

Syntax

Description

BLUEBOT.CLEAR clears all commands stored in a Blue-Bot. This is equivalent to pressing Blue-Bot’s CLEAR button, which is disabled when Blue-Bot is connected.

BLUEBOT.CLOSE

Disconnects the Blue-Bot from Logo.

Syntax

Description

BLUEBOT.CLOSE closes the connection to Blue-Bot. After a while, Blue-Bot turns off the blue lights, indicating that it is available for a new connection; it also turns its buttons back on.

BLUEBOT.GO

Executes commands stored in Blue-Bot’s memory.

Syntax

Description

BLUEBOT.GO executes all commands that a previous BLUEBOT.WRITE command has stored into Blue-Bot. This is equivalent to pressing Blue-Bot’s GO button, which is disabled when Blue-Bot is connected.

BLUEBOT.RUN

Executes Blue-Bot commands.

Syntax

Description

BLUEBOT.RUN transmits a list of commands to Blue-Bot and lets Blue-Bot execute them immediately. Use the BLUEBOT.WRITE and BLUEBOT.GO commands if you want Blue-Bot to repeatedly execute a list of stored commands.

If you call BLUEBOT.RUN with a procedure name, BLUEBOT.RUN downloads the contents of the procedure to Blue-Bot. Note that the use of variables like procedure inputs is not permitted.

Blue-Bot stores a maximum of up to 200 commands. Please note that a Logo command may consume more than one Blue-Bot command. If you get an error message that your code is too complex, consider using a repeat loop, or fewer movements. A FD 10 command, for example, would store 10 FD commands into Blue-Bot’s memory.

The following table provides an overview over all available Logo commands that Blue-Bot understands.

   
FORWARD Blue-Bot moves forward in fixed-size units. A value of 1 does not mean a single pixel as the screen turtle, but one Blue-Bot movement unit, which is about 6 inches (15 cm). If you, for example, use the command FD 2, Blue-Bot will move forward one unit, stop briefly, and then move forward a second unit.
BACK As with the FORWARD command, Blue-Bot moves backwards in the same way that it moves forward. If you use negative values as input to BACK, Blue-Bot moves forward and vice versa.
LEFT Blue-Bot turns left or right in 45-degree increments. Logo calculates the amount to turn in as few commands as possible. Therefore, Blue-Bot may make brief stops while turning.
RIGHT The same limitations that are valid for the LEFT command also apply to this command. As with FORWARD and BACK, negative values make Blue-Bot turn in the opposite direction.
WAIT This command corresponds to Blue-Bot’s Pause button. Blue-Bot pauses in units of about two seconds. Therefore, the input to WAIT (which is a millisecond value) should be a multiple of 2000. Logo rounds wait times to the nearest multiple of two seconds.
REPEAT Blue-Bot has a simple built-in repeat feature that lets it execute a list of commands between 1 and 16 times. The REPEAT command cannot be nested.
FLASH This Blue-Bot-only command flashes Blue-Bot’s eyes.

Example

BLUEBOT.RUN [REPEAT 4 [FD 1 RT 90]]

BLUEBOT.WRITE

Downloads a procedure to Blue-Bot.

Syntax

Description

BLUEBOT.WRITE transmits a procedure to Blue-Bot. Its input is the name of the procedure to transmit. It does not run these commands; use the BLUEBOT.GO command to execute a stored list of commands.

Example

TO MY.BLUEBOT REPEAT 4 [FD 1 RT 90] END MY.BLUEBOT defined BLUEBOT.WRITE “MY.BLUEBOT BLUEBOT.GO

LED

Controls a robot’s LEDs.

Syntax

Description

LED controls the LEDs of a robot. Depending on the robot type, its first inputs can be a word or a list. The second input is a color name or color value.

If a third input is given, it is the duration in milliseconds that each of the LEDs should be turned on. Note that not all LEDs are turned on at the same time, but one after another, staying on for the given time. This allows for interesting light effects.

InO-Bot: InO-Bot has eight full-color LEDs. The first input is either a number from 1 to 8, or a list containing the numbers of the LEDs to set. The second input is a color name or a color value.

Example

; InO-Bot example ; set LED #1 to red LED 1 “RED ; set LEDs 2, 3, and 4 to gold for half a second each (LED [2 3 4] “GOLD 500) ; turn all LEDs off LED [1 2 3 4 5 6 7 8] “BLACK

MOTORS

Controls a robot’s motors.

Syntax

Description

MOTORS controls the speed or a robot’s motors. It input is a value or a list of values between -1 and 1. The value 0 causes the motor to stop, and the value 1 turns on the motors at full speed. Positive values causes the motor to move forward, while negative values cause the motor to move backwards.

Currently, all floor robots accept a single number that controls the speed of all motors. Use MOTORS 0 to stop the motors.

Example

MOTORS 0.5 WAIT 1000 MOTORS 0

PROBOT? (PROBOTP, PROBOT.OPEN)

Tests if a Pro-Bot is connected and ready to receive commands.

For backwards compatibility, PROBOT.OPEN is synonymous to PROBOT?.

Syntax

Description

This command will display a dialog stating that Terrapin Logo cannot support Pro-Bot. This may change in a future version of Logo.

PROBOT? reports FALSE.

Example

PROBOT? Result: FALSE

PROBOT.CLOSE

Disconnects the Pro-Bot from Logo.

Syntax

Description

PROBOT.CLOSE does not have any effect.

PROBOT.LIGHTS

Turns the Pro-Bot’s headlights on or off.

Syntax

Description

PROBOT.LIGHTS is a placeholder command for the Pro-Bot. Logo sets the turtle’s shape to either ~HOME/TOOLBOX/ROBOTS/PROBOTLIGHTS.PNG or PROBOT.PNG.

PROBOT.LIGHTS TRUE

PROBOT.READ

Uploads all Pro-Bot procedures into Logo’s workspace.

Syntax

Description

This command will display a dialog stating that Terrapin Logo cannot support Pro-Bot. This may change in a future version of Logo.

PROBOT.SOUND

Plays Pro-Bot sounds.

Syntax

Description

PROBOT.SOUND plays one of the seven Pro-Bot sounds by playing one of the sound files at ~home/Sounds/Probot1.wav to Probot7.wav. It is a placeholder for the Pro-Bot’s Sound command.

Example

PROBOT.SOUND 3

PROBOT.WRITE

Downloads all Pro-Bot procedures to the Pro-Bot.

Syntax

Description

This command will display a dialog stating that Terrapin Logo cannot support Pro-Bot. This may change in a future version of Logo.

Example

PROBOT.WRITE

SELECT.BLUETOOTH

Selects a Bluetooth device.

Syntax

Description

SELECT.BLUETOOTH opens the Bluetooth selection dialog and lets the user select a Bluetooth device. Its output is a two-element list. The first element is the device type, like e.g. BLUEBOT or INOBOT, and the second element is the Logo name of the device. This may be different from the first element if the user has renamed the Bluetooth device. If the user canceled the dialog, SELECT.BLUETOOTH outputs an empty list. On errors, SELECT.BLUETOOTH throws a runtime error which can be caught with the CATCH command.

SELECT.BLUETOOTH must be used in response to a user action, like clicking a button. Browser environments demand this functionality.

Example

SELECT.BLUETOOTH Result: [BLUEBOT BETTY]

TUFFBOT?

Also: TUFFBOTP, TUFFBOT.OPEN

Tests if the Tuff-Bot is connected and ready to receive commands.

Syntax

Description

TUFFBOT? reports TRUE if Logo can talk to a Tuff-Bot.

For backwards compatibility, TUFFBOT.OPEN is synonymous to TUFFBOT?.

Example

TUFFBOT? Result: FALSE

TUFFBOT.BATTERY

Reports Tuff-Bot’s battery level.

Syntax

Description

TUFFBOT.BATTERY reports Tuff-Bot’s battery level, which is a number between 0 and 1. It may take a few seconds before Tuff-Bot actually reports the battery level; the command would report 0 in that case.

Example

TUFFBOT.BATTERY Result: 0.8

TUFFBOT.BUTTONS

Programs Tuff-Bot’s buttons.

Syntax

Description

TUFFBOT.BUTTONS programs Tuff-Bot’s obstacle avoidance and speed buttons. The first input is either TRUE or FALSE, and turns obstacle detection on or off. The second input is a value between 0 and 2, which indicates how many times Tuff-Bot’s speed button is pressed:

  • 0: Tuff-Bot stops between each command.
  • 1: Tuff-Bot executes all commands in a single, flowing motion.
  • 2: In addition to 1, Tuff-Bot makes quicker turns.

Example

TUFFBOT.BUTTONS TRUE 1

TUFFBOT.CLEAR

Clears all commands stored in Tuff-Bot’s memory.

Syntax

Description

TUFFBOT.CLEAR clears all commands stored in a Tuff-Bot. This is equivalent to pressing Tuff-Bot’s CLEAR button, which is disabled when Tuff-Bot is connected. Note that Tuff-Bot’s obstacle avoidance subroutine cannot be cleared.

TUFFBOT.CLOSE

Disconnects the Tuff-Bot from Logo.

Syntax

Description

TUFFBOT.CLOSE closes the connection to Tuff-Bot. After a while, Tuff-Bot turns off the blue lights, indicating that it is available for a new connection; it also turns its buttons back on.

TUFFBOT.GO

Executes commands stored in Tuff-Bot’s memory.

Syntax

Description

TUFFBOT.GO executes all commands that a previous TUFFBOT.WRITE command has stored into Tuff-Bot. This is equivalent to pressing Tuff-Bot’s GO button, which is disabled when Tuff-Bot is connected.

TUFFBOT.OBSTACLE

Downloads an obstacle avoidance routine to Tuff-Bot.

Syntax

Description

TUFFBOT.OBSTACLE downloads an obstacle-avoidance subroutine to Tuff-Bot. This subroutine takes the same commands as the TUFFBOT.WRITE command. The subroutine should be short, and back up Tuff-Bot, and turin it into a different direction.

Example

TUFFBOT.OBSTACLE [BACK 1 RT 45]

TUFFBOT.RUN

Executes Tuff-Bot commands.

Syntax

Description

TUFFBOT.RUN transmits a list of commands to Tuff-Bot and lets Tuff-Bot execute them immediately. Use the TUFFBOT.WRITE and TUFFBOT.GO commands if you want Tuff-Bot to repeatedly execute a list of stored commands.

If you call TUFFBOT.RUN with a procedure name, TUFFBOT.RUN downloads the contents of the procedure to Tuff-Bot. Note that the use of variables like procedure inputs is not permitted.

Tuff-Bot stores a maximum of up to 200 commands. Please note that a Logo command may consume more than one Tuff-Bot command. If you get an error message that your code is too complex, consider using a repeat loop, or fewer movements. A FD 10 command, for example, would store 10 FD commands into Tuff-Bot’s memory.

The following table provides an overview over all available Logo commands that Tuff-Bot understands.

   
FORWARD Tuff-Bot moves forward in fixed-size units. A value of 1 does not mean a single pixel as the screen turtle, but one Tuff-Bot movement unit, which is about 6 inches (15 cm). If you, for example, use the command FD 2, Tuff-Bot will move forward one unit, stop briefly, and then move forward a second unit.
BACK As with the FORWARD command, Tuff-Bot moves backwards in the same way that it moves forward. If you use negative values as input to BACK, Tuff-Bot moves forward and vice versa.
LEFT Tuff-Bot turns left or right in 45-degree increments. Logo calculates the amount to turn in as few commands as possible. Therefore, Tuff-Bot may make brief stops while turning.
RIGHT The same limitations that are valid for the LEFT command also apply to this command. As with FORWARD and BACK, negative values make Tuff-Bot turn in the opposite direction.
WAIT This command corresponds to Tuff-Bot’s Pause button. Tuff-Bot pauses in units of about two seconds. Therefore, the input to WAIT (which is a millisecond value) should be a multiple of 2000. Logo rounds wait times to the nearest multiple of two seconds.
REPEAT Tuff-Bot has a simple built-in repeat feature that lets it execute a list of commands between 1 and 16 times. The REPEAT command cannot be nested.

Example

TUFFBOT.RUN [REPEAT 4 [FD 1 RT 90]]

TUFFBOT.WRITE

Downloads a procedure to Tuff-Bot.

Syntax

Description

TUFFBOT.WRITE transmits a procedure to Tuff-Bot. Its input is the name of the procedure to transmit. It does not run these commands; use the TUFFBOT.GO command to execute a stored list of commands.

Example

TO MY.TUFFBOT REPEAT 4 [FD 1 RT 90] END MY.TUFFBOT defined TUFFBOT.WRITE “MY.TUFFBOT TUFFBOT.GO

Robot Commands
Privacy Statement